Rheometer [MR-10} since 1999

{"type":"img","src":"//cdn.quv.kr/lubnzlqjk/up/618492a714e17_1920.png","height":75}

Products

{"google":["Poppins","Barlow"],"custom":["SCDream","Noto Sans KR","Hangyule"]}

IRHD Hardness Tester – Full Automatic System Universal Testing Machine Oscillating Disk Rheometer Moving Die Rheometer Auto Moving Die Rheometer Mooney Viscometer Lab. Press Sample Cutter Compression Set Automatic Rubber Aging Tester/ 2nd Curing Chamber Automatic Freezing Point Test Chamber

Moving Die Rheometer

Moving Die Rheometer
The Vluchem’s moving die rheometer (MR-10) for determining selected vulcanization characteristics of vulcanizable rubber compounds using rotorless sealed torsion meter and measured according to ASTM D 5289, ISO 6502-3 and KS M ISO6502.
MR-10 may be used for quality control in rubber manufacturing processes, for research and development testing of raw-rubber compounded in an evaluation formulation, and for evaluating various raw materials used in preparing rubber compounds.
The instrument is equipped with the highest torque measurement, reliability, along with stiff hardware, superior heater, temperature sensor, temperature controller and Vluchem’s own designed data acquisition device and software.
Designed to be placed on a desk instrument and is supplied with the Vluchem’s own data analysis software for test management, data recording and printing, automated Pass/Fail testing as well as recall processing of historical data, also available an online upload software as an option.

This instrument is supplied with Ce labeling

(MR-10)

Ce Certification
Technical Specification

Model	MR-10
International Standard	ASTM D 5289 ISO 6502 KS M ISO 6502
Motor	Induction Motor
Die configuration	Biconical, closed die system, sealed
Oscillation frequency	1.67Hz
Oscillation angle	0.5°[Option]1°, 3°, 5° Mechanically adjustable
Protection for operator Temp. shield screen moving	Before test chamber closing
Test chamber moving	By Pneumatic
Motor Platen operation	available by hardware & software
Temperature control	available by hardware & software
Temperature range	microprocessor controlled RT ~ 220°C
Temp. Sensor Type	PT 100 Ω
Torque range	0~ 200 dNm
Calibration	Calibration jig
Data	Torque[dNm, lbf.in] Temperature [°C] MH, ML Ts1, Ts2, Tc10(N), Tc50(N), Tc90(N) Automatic test results pass/fail function Trend graphs Tolerance limits by time and torque Data excel export function, Average, S-Dev
Pneumatics	min 4.5 bar/60 Psi
Electrical	200~230V, 3A, single phase, 50Hz/60Hz
Emergency Button
Dimension	W615 X D685 X H1200 mm
Weight	160 kgs

Moving Die Rheometer

Moving Die Rheometer
The Vluchem’s moving die rheometer (MR-10)

for determining selected vulcanization

characteristics of vulcanizable rubber

compounds using rotorless sealed

torsion meter and measured according

to ASTM D 5289, ISO 6502-3 and KS M ISO6502.
MR-10 may be used for

quality control in rubber manufacturing processes,

for research and development

testing of raw-rubber compounded in an evaluation

formulation, and for evaluating various raw materials

used in preparing rubber compounds.
The instrument is equipped with the highest torque

measurement, reliability, along with stiff hardware,

superior heater, temperature sensor, temperature

controller and Vluchem’s own designed

data acquisition device and software.
Designed to be placed on a desk instrument and is

supplied with the Vluchem’s own

data analysis software for test management,

data recording and printing,

automated Pass/Fail testing as well as recall

processing of historical data, also available

an online upload software as an option.

This instrument is supplied with Ce labeling
(MR-10)

Ce Certification

Technical Specification

Model	MR-10
International Standard	ASTM D 5289 ISO 6502 KS M ISO 6502
Motor	Induction Motor
Die configuration	Biconical, closed die system, sealed
Oscillation frequency	1.67Hz
Oscillation angle	0.5°[Option]1°, 3°, 5° Mechanically adjustable
Protection for operator Temp. shield screen moving	Before test chamber closing
Test chamber moving	By Pneumatic
Motor Platen operation	available by hardware & software
Temperature control	available by hardware & software
Temperature range	microprocessor controlled RT ~ 220°C
Temp. Sensor Type	PT 100 Ω
Torque range	0~ 200 dNm
Calibration	Calibration jig
Data	Torque[dNm, lbf.in] Temperature [°C] MH, ML Ts1, Ts2, Tc10(N), Tc50(N), Tc90(N) Automatic test results pass/fail function Trend graphs Tolerance limits by time and torque Data excel export function, Average, S-Dev
Pneumatics	min 4.5 bar/60 Psi
Electrical	200~230V, 3A, single phase, 50Hz/60Hz
Emergency Button
Dimension	W615 X D685 X H1200 mm
Weight	160 kgs

{"google":["Poppins","Barlow","Roboto"],"custom":["Noto Sans KR","SCDream","Hangyule"]}

{"google":["Poppins","Barlow","Alegreya"],"custom":["SCDream","Hangyule","Noto Sans KR","Nanum Gothic"]}

50 Yonhee-ro Seodaemun-gu Seoul Korea 03781

Business License 113-06-49112
Tel:+82-(0)2-336-5720 Fax: +82-(0)2-336-5721

vluchem@daum.net , info@vluchem.com

50 Yonhee-ro Seodaemun-gu Seoul Korea 03781 Business License 113-06-49112 Tel:+82-(0)2-336-5720 Fax: +82-(0)2-336-5721 vluchem@daum.net , info@vluchem.com
Copyright ⓒ Vluchem IND All rights reserved.

{"google":["Poppins"],"custom":["Noto Sans KR","SCDream"]}